Select a different country or region to see content for your location.
United States
19:10:33 GMT+0000 (Coordinated Universal Time)
YRTCM460-XL
Axial/radial roller bearing
Axial/radial bearings, double direction, screw mounting, with integrated angular measuring system
Product information
dimensions principale & données de performance
| d | 460 mm | Alésage |
0 mm | Alésage tolérance haute | |
-0,023 mm | Alésage tolérance basse | |
| D | 600 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0,028 mm | Outside diameter lower tolerance | |
| H | 70 mm | Height |
| Cr | 265.000 N | Charge dyn. de base, radiale |
| C0r | 880.000 N | Charge stat. de base, radiale |
| Ca | 290.000 N | Charge dyn. de base, axiale |
| C0a | 2.550.000 N | charge stat. de base, axiale |
| nG | 150 1/min | Limiting speed |
| MR | 25 Nm | couple de frottement roulement |
| ≈m | 44,92 kg | Weight |
Cotes de montage
| J | 482 mm | Pitch circle diameter fixing holes in inner ring |
| J1 | 580 mm | Pitch circle diameter fixing holes in outer ring |
| d1 | 9,3 mm | Diamètre trous de fixation bague intérieure |
| d2 | 15 mm | Diamètre du lamage des trous de fixation |
| a | 8,2 mm | Profondeur du lamage des trous de fixation |
46 | Quantity of fixing holes inner ring | |
| d3 | 9,3 mm | Diamètre trous de fixation bague extérieure |
45 | Quantity of fixing holes outer ring | |
| n | 48 | Pitch quantity |
| t | 7,5 ° | Pitch separation angle |
| G | M12 | Threaded extraction hole |
3 | Quantity of threaded extraction hole | |
| MA | 34 Nm | Screw tightening torque |
2 | Quantity of retaining screws | |
| t1 | 6 µm | Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. |
Dimensions
| H1 | 46 mm | Hauteur face de contact bague extérieure |
0,06 mm | Height contact face outerring H1 upper tolerance | |
-0,06 mm | Tolérance inférieure hauteur de contact butée bague extérieure H1 | |
| H2 | 24 mm | Height contact face outer ring |
0,03 mm | Height contact face outerring H2 upper tolerance | |
-0,03 mm | Height contact face outerring H2 lower tolerance | |
| HM | 19 mm | Height shaft washer |
| D1 max | 560,9 mm | Maximum diameter inner ring |
| DM | 557,6 mm | Diameter of dimensional scale on shaft locating washer |
| C | 22 mm | Width of outer ring |
Plage de température
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
information additionnelle
| caL | 12.000 N/µm | Rigidité axiale à la position du roulement |
| crL | 6.500 N/µm | Radial rigidity of bearing position |
| ckL | 429.000 Nm/mrad | Tilting rigidity of bearing position |
| caL | 43.000 N/µm | Rigidité axiale des éléments roulants |
| crL | 17.000 N/µm | Radial rigidity of rolling element set |
| ckL | 1.543.000 Nm/mrad | Tilting rigidity of rolling element set |
Downloads:
Characteristics
